机械图纸中常见的符号及意义(中英文)

阅读: 评论:0

2024年2月5日发(作者:)

机械图纸中常见的符号及意义(中英文)

直度-一个条件,一个面元素或轴是一条直线。

Straightness - a condition where an element of a surface or an axis is a straight

line.

平整度-是条件,表面有所有的元素在一个平面。

Flatness - is the condition of a surface having all elements in one plane.

圆度-描述条件对革命的表面(圆柱,圆锥,球)在所有点的表面相交的任何飞机。

Roundness - describes the condition on a surface of revolution (cylinder, cone,

sphere) where all points of the surface intersected by any plane.

圆柱度-描述了一个条件的旋转面,使所有的点面距离相等,一个共同的旋转轴。

Cylindricity - describes a condition of a surface of revolution in which all points

of a surface are equidistant from a common axis.

线轮廓度-是条件允许量相同的剖面变化,醚单边或双边,沿着一条线元素的特征。

Profile of a Line - is the condition permitting a uniform amount of profile

variation, ether unilaterally or bilaterally, along a line element of a feature.

面轮廓度-是条件允许量相同的剖面变化,醚单边或双边,上表面。

Profile of a Surface - is the condition permitting a uniform amount of profile

variation, ether unilaterally or bilaterally, on a surface.

周围标志-表明公差适用于所有周围的部分表面。

All Around Symbol - indicating that a tolerance applies to surfaces all around

the part

倾斜度-是表面,轴,或中线,这是从某一特定角度基准平面或轴。Angularity - is the condition of a surface, axis, or centerplane, which is at a

specified angle from a datum plane or axis.

垂直度-条件是表面,轴,或线,这是90度的基准平面或基准轴

Perpendicularity - is the condition of a surface, axis, or line, which is 90 deg.

From a datum plane or a datum axis

平行度-一个表面,线,或轴,这是等距离的所有点,基准平面或轴。Parallelism - is the condition of a surface, line, or axis, which is equidistant at all

points from a datum plane or axis.

位置公差-定义一个区域内的轴或中心平面的一个特点是允许不同的真正的(理论上精确)位置。

Position Tolerance - defines a zone within which the axis or center plane of a

feature is permitted to vary from true (theoretically exact) position.

同心度-描述在其中一个条件的2个或更多的功能,在任何组合,有一个共同的旋转轴。

Concentricity - describes a condition in which two or more features , in any

combination, have a common axis.

对称度 -是一种状况,其中一个功能(或功能)是处理有关对称中心平面基准特征。

Symmetry - is a condition in which a feature (or features) is symmetrically

disposed about the center plane of a datum feature.

跳动-是复合偏离理想形式的一部分表面上通过革命旋转(360度)的一部分,在基准轴

Runout - is the composite deviation from the desired form of a part surface of

revolution through on full rotation (360 deg) of the part on a datum axis.

全跳动-是同时复合控制所有表面元素在所有圆轮廓测量位置的部分是通过旋转360。

Total Runout - is the simultaneous composite control of all elements of a

surface at all circular and profile measuring positions as the part is rotated

through 360.

最大材料状态(三菱)-是条件的一部分功能其中包含的最高金额材料在规定的极限尺寸。那就是:最小孔尺寸和最大轴尺寸。

Maximum Material Condition (MMC) - is that condition of a part feature

wherein it contains the maximum amount of

material within the stated limits of size. That is: minimum hole size and maximum

shaft size.

最小材料状态(落马洲)-意味着条件的一部分功能的大小,其中也包含了最小(最低)的材料,例子,最大孔尺寸和最小轴径。它的对

面是最大材料状态。 Least Material Condition (LMC) - implies that

condition of a part feature of size wherein it contains the least (minimum) amount

of material, examples, largest hole size and smallest shaft size. It is opposite to

maximum material condition.

不论大小的特征(范畴专题)-的情况下,形状公差,跳动或位置必须满足,不论在哪里,它的特点是在其尺寸公差。

Regardless Of Feature Size (RFS) - the condition where the tolerance of form,

runout or location must be met irrespective of where the feature lies within its

size tolerance

投影公差区-适用于孔内的销,螺栓,螺钉,等等,是插入。它控制孔的垂直度的程度的预测从洞,因为它涉及到交配的一部分清除。投影公差区延伸高于地面的部分功能的针的长度,螺栓,螺钉相对于其组装与交配的一部分。

Projected Tolerance Zone - applies to a hole in which a pin, stud, screw, etc., is

to be inserted. It controls the perpendicularity of the hole to the extent of the

projection from the hole and as it relates to the mating part clearance. The

projected tolerance zone extends above the surface of the part to the functional

length of the pin, stud, and screw relative to its assembly with the mating part.

切平面-切面显示。该标志被放置在特征控制框后表示宽容。

Tangent Plane - indicating a tangent plane is shown. The symbol is placed in

the feature control frame following the stated tolerance.

自由状态的变化-是一个用来描述失真部分去除后的部队在加工过程中的应用

Free State Variations - is a term used to describe distortion of a part after

removal of forces applied during manufacture.

直径-圆形特征时使用的显示领域的绘图或表明,宽容是针锋相对的当用在特征控制框架

Diameter - indicates a circular feature when used on the field of a drawing or

indicates that the tolerance is diametrical when used in a feature control frame

基本尺寸-用来描述的确切尺寸,轮廓,方向或位置的一个特征。一个基本的层面总是与特征控制框架或基准目标。(理论上精确尺寸标准)

Basic Dimension - used to describe the exact size, profile, orientation or

location of a feature. A basic dimension is always associated with a feature

control frame or datum target. (Theoretically exact dimension in ISO)

参考尺寸-尺寸通常不容忍使用,仅供参考。它不适用于生产或检验业务。(辅助尺寸标准)

Reference Dimension - a dimension usually without tolerance, used for

information purposes only. It does not govern production or inspection

operations. (Auxiliary dimension in ISO)

基准特征-实际是用来建立一个基准组件特征.

Datum Feature - is the actual component feature used to establish a datum.

尺寸源-表示维源于飞机由短和三维表面的限制适用于其他表面

Dimension Origin - Signifies that the dimension originates from the plane

established by the shorter surface and dimensional limits apply to the other

surface.

特征控制框-矩形盒包含几何特征符号,和形式,或位置公差。如果需要,参照基准和改性剂适用于功能或数据也包含在箱。

Feature Control Frame - is a rectangular box

containing the geometric characteristics symbol, and

the form, runout or location tolerance. If necessary,

datum references and modifiers applicable to the

feature or the datums are also contained in the box.

圆锥锥度-是用来表明锥度锥度。这个符号是始终显示垂直腿向左。

Conical Taper - is used to indicate taper for conical tapers. This symbol is

always shown with the vertical leg to the left.

斜坡度-是用来表明坡平锥度。这个符号是始终显示垂直腿向左。Slope - is used to indicate slope for flat tapers. This symbol is always shown

with the vertical leg to the left.

沉孔或锪平-是用来表示一个扩孔或空口平面。符号之前的尺寸的扩孔或空口平面,没有空间

Counterbore/Spotface - is used to indicate a counterbore or a spotface. The

symbol precedes the dimension of the counterbore or spotface, with no space

埋头孔-是用来表示一个锪。符号之前的尺寸的锪没有空间。

Countersink - is used to indicate a countersink. The symbol precedes the

dimensions of the countersink with no space.

深度-是用来表明,一方面适用于深度的特征。这个符号之前的深度值之间没有空间。

Depth/Deep - is used to indicate that a dimension applies to the depth of a

feature. This symbol precedes the depth value with no space in between.

正方形-是用来表明,一个单一的尺寸适用于方形。符号之前的尺寸之间没有空间。

Square - is used to indicate that a single dimension applies to a square shape.

The symbol precedes the dimension with no space between.

相同的地方-是用来与一个值显示的次数维度或特征是反复的绘制。Number of Places - the X is used along with a value to indicate the number of

times a dimension or feature is repeated on the drawing.

电弧长度-表明,维弧长度测量曲面轮廓。符号放在上面的维度。

Arc Length - indicating that a dimension is an arc length measured on a curved

outline. The symbol is placed above the dimension.

半径-创建一个区域定义的弧(最大和最小半径)。零件表面必须躺在这个区域。

Radius - creates a zone defined by two arcs (the minimum and maximum radii).

The part surface must lie within this zone

厚度 新代词(t)

δ

EQS

球面半径-之前的价值维度或耐受性。

Spherical Radius - precedes the value of a dimension or tolerance.

均布-平均分布到某各部位

球形直径公差值-前应在指定的公差值代表球区。此外,一个位置公差可能被用来控制的位置,一个球形特征相对于其他特征的一部分。符号为球形直径之前的尺寸大小的特征和位置公差值,表明一个球形公差带

Spherical Diameter - shall precede the tolerance value where the specified

tolerance value represents spherical zone. Also, a positional tolerance may be

used to control the location of a spherical feature relative to other features of a

part. The symbol for spherical diameter precedes the size dimension of the

feature and the positional tolerance value, to indicate a spherical tolerance zone

控制半径-创造了一个宽容的定义双圆弧(最大和最小半径),切向相邻表面。其中一个控制半径是指定的,部分轮廓公差带内的月牙形必定是一个公平的曲线没有单位或逆转。此外,半径在所有点上的部分轮廓不应小于规定的最低限额也不大于最大限度。

Controlled Radius - creates a tolerance zone defined by two arcs (the minimum

and maximum radii) that are tangent to the adjacent surfaces. Where a

controlled radius is specified, the part contour within the crescent-shaped

tolerance zone must be a fair curve without flats or reversals. Additionally, radii

taken at all points on the part contour shall neither be smaller than the specified

minimum limit nor larger than the maximum limit.

C

45°倒角

之间-表明一个外形公差适用于几个连续的功能,可以指定在外形公差的开始和结束。这些信件是参考使用符号(1994)或词之间的图纸发到早期版本的标准。

Between - to indicate that a profile tolerance applies to several contiguous

features, letters may designate where the profile tolerance begins and ends.

These letters are referenced using the between symbol (since 1994) or the word

between on drawings made to earlier versions of the Standard.

统计公差-是分配公差相关装配部件的基础上,统计(如装配公差等于平方根的平方和个别公差)。应用统计公差,公差个别组件可以增加或间隙配合的零件可减少。增加容忍或改进适合可能降低制造成本和提高产品的性能,但只应在适当的统计过程控制将被使用。因此,应考虑到指定所需的处长和/或血清或其他过程性能指数。

Statistical Tolerance - is the assigning of tolerances to related components of

an assembly on the basis of sound statistics (such as the assembly tolerance is

equal to the square root of the sum of the squares of the individual tolerances).

By applying statistical tolerancing, tolerances of individual components may be

increased or clearances between mating parts may be reduced. The increased

tolerance or improved fit may reduce manufacturing cost or improve the

product's performance, but shall only be employed where the appropriate

statistical process control will be used. Therefore, consideration should be given

to specifying the required Cp and /or Cpk or other process performance indices.

基准目标-是一个指定的点,线,或地区的一部分,用于建立基准参考飞机制造及检验业务。

Datum Target - is a specified point, line, or area on a part

that is used to establish the Datum Reference Plane for

manufacturing and inspection operations.

靶点显示的基准目标点三维位于直接表面的看法。

Target Point - indicates where the datum target point is dimensionally located

on the direct view of the surface.

(英文版 )

Two regulations promulgated for implementation is in the party in

power for a long time and the rule of law conditions, the implementation of

comprehensive strictly strategic plan, implementation in accordance with

the rules and discipline to manage the party, strengthen inner-party

supervision of major initiatives. The two regulations supporting each other,

the < code > adhere to a positive advocate, focusing on morality is of Party

members and Party leading cadres can see, enough to get a high standard; <

rule > around the party discipline, disciplinary ruler requirements, listed as

"negative list, focusing on vertical gauge, draw the party organizations and

Party members do not touch the" bottom line ". Here, the main from four

square face two party rules of interpretation: the first part introduces two

party Revised regulations the necessity and the revision process; the

second part is the interpretation of the two fundamental principles of the

revision of laws and regulations in the party; the third part introduces two

party regulations modified the main changes and needs to grasp several

key problems; the fourth part on how to grasp the implementation of the

two regulations of the party. < code > and < Regulations > revised the

necessity and revised history of the CPC Central Committee the

amendment to the Chinese Communist Party members and leading cadres

honest politics several guidelines > and < Chinese Communist Party

discipline and Punishment Regulations > column 1 by 2015 to strengthen

party laws and regulations focus. Two party regulations revision work

lasted a Years, pooling the wisdom of the whole party, ideological

consensus, draw historical experience, respect for the wisdom of our

predecessors, which reflects the unity of inheritance and innovation;

follow the correct direction, grasp the limited goals, adhere to the party's

leadership, to solve the masses of the people reflect a focus on the problem.

The new revision of the < code > and < rule >, reflects the party's 18 and

the eighth session of the third, the spirit of the fourth plenary session,

reflecting the experience of studying and implementing the General

Secretary Xi Jinping series of important speech, reflects the party's

eighteen years comprehensive strictly practice. (a) revised two regulations

of the party need of < the ICAC guidelines > in < in 1997 Leaders as

members of the Communist Party of China clean politics certain criteria

(Trial) > based on revised, the promulgation and implementation of

January 2010, to strengthen the construction of the contingent of leading

cadres play an important role. But with the party to manage the party

strictly administering the deepening, has not been able to fully meet the

actual needs. Content is too complicated, "eight prohibition, 52 are not

allowed to" hard to remember, and also difficult to put into practice; the

second is concisely positive advocated by the lack of prohibited provisions

excessive, no autonomy requirements; the third is banned terms and

discipline law, both with the party discipline, disciplinary regulations

repeat and Criminal law and other laws and regulations repeat; the fourth is

to "clean" the theme is not prominent, not for the existing problems, and is

narrow, only needle of county-level leading cadres above. < rule > is in

1997 < Chinese Communist Party disciplinary cases (Trial) > based on

revision, in December 2003 the promulgation and implementation, to

strengthen the construction of the party play very important role. Along

with the development of the situation, which many provisions have been

unable to fully meet the comprehensive strictly administering the practice

needs. One is Ji law, more than half of the provisions and criminal law and

other countries laws and regulations Repetition; two is the political

discipline regulations is not prominent, not specific, for violation of the

party constitution, damage the authority of Party Constitution of

misconduct lack necessary and serious responsibility to pursue; third is the

main discipline for the leading cadres, does not cover all Party members.

Based on the above situation, need to < the criterion of a clean and honest

administration > and < rule > the two is likely to be more relevant

regulations first amendment. By revising, really put the authority of Party

discipline, the seriousness in the party tree and call up the majority of Party

members and cadres of the party constitution of party compasses party

consciousness. (II) two party regulations revision process the Central

Committee of the Communist Party of China attaches great importance to

two regulations revision . Xi Jinping, general books recorded in the Fifth

Plenary Session of the eighth session of the Central Commission for

Discipline Inspection, on the revised regulations < > made clear

instructions. According to the central deployment, the Central Commission

for Discipline Inspection from 2014 under six months begin study two

regulations revision. The Standing Committee of the Central Commission

for Discipline Inspection 4 review revised. Comrade Wang Qishan 14

times held a special meeting to study two regulations revision, amendment

clarifies the direction, major issues of principle, path and target,

respectively held a forum will listen to part of the province (area) secretary

of the Party committee, Secretary of the Discipline Inspection Commission,

part of the central ministries and state organs Department

The first party committee is mainly responsible for people, views of

experts and scholars and grassroots party organizations and Party members.

Approved by the Central Committee of the Communist Party of China, on

7 September 2015, the general office of the Central Committee of the Party

issued a notice to solicit the provinces (autonomous regions, municipalities)

Party, the central ministries and commissions, state ministries and

commissions of the Party (party), the General Political Department of the

military, every 3 people organization of Party of two regulations revision

opinion. Central Commission for Discipline Inspection of extensive

solicitation of opinions, careful study, attracting, formed a revised sent

reviewers. In October 8 and October 12, Central Committee Political

Bureau Standing Committee and the Political Bureau of the Central

Committee After consideration of the two regulations revised draft. On

October 18, the Central Committee of the Communist Party of China

formally issued two regulations. Can say, two laws amendment

concentrated the wisdom of the whole party, embodies the party. Second, <

code > and < Regulations > revision of the basic principles of two party

regulations revision work and implement the party's eighteen, ten eight

plenary, the spirit of the Fourth Plenary Session of the Eleventh Central

Committee and General Secretary Xi Jinping important instructions on the

revised < low political criterion > and < Regulations >, highlighting the

ruling party characteristics, serious discipline, the discipline quite in front

of the law, based on the current, a long-term, advance as a whole, with Bu

Xiuding independent < rule > and < rule >. Main principle is: first, adhere

to the party constitution to follow. The constitution about discipline and

self-discipline required specific, awaken the party constitution of party

compasses party consciousness, maintaining the authority of the

constitution. General Secretary Xi Jinping pointed out that "no rules, no

side round. Party constitution is the fundamental law, the party must follow

the general rules. In early 2015 held the eighth session of the Central

Commission for Discipline Inspection Fifth Plenary Session of the 16th

Central Committee, Xi Jinping again pointed out that constitution is the

party must follow the general rules, but also the general rules." the revision

of the < code > and < rule > is Method in adhere to the regulations

established for the purpose of combining rule of virtue is to adhere to the

party constitution as a fundamental to follow, the constitution authority set

up, wake up the party constitution and party rules the sense of discipline,

the party constitution about discipline and self-discipline specific

requirements. 4 second is to adhere to in accordance with the regulations

governing the party and the party. The Party of rule of virtue "de", mainly

refers to the party's ideals and beliefs, excellent traditional style. The

revised the < code > closely linked to the "self-discipline", insisting on the

positive initiative, for all members, highlight the "vital few", emphasized

self-discipline, focusing on the morality, and the majority of Party

members and the ideological and moral standards. The revised < > Ji

method separately, Ji, Ji Yan to Method, as a "negative list", emphasizing

the heteronomy, focusing on vertical gauge. Is this one high and one low, a

positive reaction, the strict party discipline and practice results

transformation for the integration of the whole party to observe moral and

discipline requirements, for the majority of Party members and cadres

provides benchmarking and ruler. Third, insist on to. In view of the

problems existing in the party at the present stage, the main problems of

Party members and cadres in the aspect of self-discipline and abide by the

discipline to make clearly defined, especially the party's eighteen years

strict political discipline and political rules, organization and discipline and

to implement the central eight provisions of the spirit against the four

winds and other requirements into Disciplinary provisions. Not one pace

reachs the designated position, focusing on in line with reality, pragmatic

and effective. After the revision of major changes, major changes in the <

code > and < rule > modified and needs to grasp several key problems (a) <

code > < code > adhere to according to regulations governing the party and

party with morals in combination, for at the present stage, the leadership of

the party members and cadres and Party members in existing main

problems of self-discipline, put forward principles, requirements and

specifications, showing Communists noble moral pursuit, reflected at all

times and in all over the world ethics from high from low 5 common

requirements. One is closely linked to the "self-discipline", removal and no

direct relation to the provisions of . the second is adhere to a positive

advocate, "eight prohibition" 52 are not allowed to "about the content of

the" negative list moved into synchronization amendment < cases >. Three

is for all the party members, will apply object from the leadership of the

party members and cadres to expand to all Party members, fully embodies

the comprehensive strictly required. The fourth is prominent key minority,

seize the leadership of the party members and cadres is the key, and put

forward higher requirements than the ordinary Party members. Five is to

simplify, and strive to achieve concise, easy to understand, easy to

remember. The revised < code > is the ruling Party since the first insists on

a positive advocate forAll Party members and the self-discipline norms,

moral declaration issued to all members of the party and the National

People's solemn commitment. > < criterion of a clean and honest

administration consists of 4 parts, 18, more than 3600 words. After the

revision of the < code >, a total of eight, 281 words, including lead,

specification and Party member cadre clean fingered self-discipline norms,

etc. Part 3 members low-cost clean and self-discipline, the main contents

can be summarized as "four must" "eight code". Lead part, reiterated on

ideal and faith, fundamental purpose, the fine traditions and work style,

noble sentiments, such as "four must" the principle of requirements, strong

tone of self-discipline, The higher request for 6 and supervised tenet, the

foothold in permanent Bao the party's advanced nature and purity, to

reflect the revised standards requirements. Members of self-discipline

norms around the party members how to correctly treat and deal with the

"public and private", "cheap and rot" thrifty and extravagance "bitter

music", put forward the "four norms". Party leader cadre clean fingered

self-discipline norms for the leadership of the party members and cadres of

the "vital few", around the "clean politics", from civil servant of the color,

the exercise of power, moral integrity, a good family tradition and other

aspects of the leadership of the party members and cadres of the "four

norms" < > < norm norm. "The Party member's self-discipline norms" and

"party members and leading cadre clean fingered self-discipline norms," a

total of eight, collectively referred to as the "eight". "Four must" and

"eight" of the content from the party constitution and Party's several

generation of leaders, especially Xi Jinping, general secretary of the

important discussion, refer to the "three discipline and eight points for

attention" statements, and reference some embody the Chinese nation

excellent traditional culture essence of epigrams. (2) the revised

regulations, the main changes in the revised Regulations > to fully adapt to

the strictly requirements, reflects the according to the regulations

governing the law of recognition of deepening, the realization of the

discipline construction and Jin Ju. < rule > is party a ruler, members of the

basic line and follow. And the majority of Party members and cadres of

Party organizations at all levels should adhere to the bottom line of

thinking, fear discipline, hold the bottom line, as a preventive measure, to

keep the party's advanced nature and purity. 1, respect for the constitution,

refinement and discipline. Revised < rule > from comprehensive comb

physical constitution began, the party constitution and other regulations of

the Party of Party organizations and Party discipline requirements

refinement, clearly defined in violation of the party constitution will be in

accordance with regulations to give the corresponding disciplinary action.

The original 10 categories of misconduct, integration specification for

political discipline, discipline, honesty and discipline masses Ji Law and

discipline and discipline and other six categories, the content of < rule >

real return to Party discipline, for the majority of Party members and listed

a "negative list. 7 2, highlighting the political discipline and political

rules. > < Regulations according to the stage of the discipline of

outstanding performance, emphasizing political discipline and political

rules, organization and discipline, in opposition to the party's leadership

and the party's basic theory, basic line, basic program and basic experience,

the basic requirement of behavior made prescribed punishment, increase

the cliques, against the organization such as violation of the provisions, to

ensure that the central government decrees and the Party of centralized and

unified. 3, adhere to strict discipline in the law and discipline In front, Ji

separated. Revised < Regulations > adhere to the problem oriented, do Ji

separated. Any national law existing content, will not repeat the provisions,

the total removal of 79 and criminal law, repeat the content of the public

security management punishment law, and other laws and regulations. In

the general reiterated that party organizations and Party members must

conscientiously accept the party's discipline, die van comply with national

laws and regulations; at the same time, to investigate violations of Party

members and even criminal behavior of Party discipline and

responsibility, > < Regulations distinguish five different conditions, with

special provisions were made provisions, so as to realize the connection of

Party discipline and state law. 4, reflect Wind building and anti-corruption

struggle of the latest achievements. < rule > the party's eighteen years

implement the spirit of the central provisions of the eight, against the

requirements of the "four winds" and transformation for disciplinary

provisions, reflecting the style construction is always on the road, not a

gust of wind. In the fight against corruption out of new problems, increase

the trading rights, the use of authority relatives profit and other disciplinary

terms. Prominent discipline of the masses, the new against the interests of

the masses and ignore the demands of the masses and other disciplinary

terms and make provisions of the disposition and the destruction of the

party's close ties with the masses.

Discipline to protect the party's purpose. 8 of these regulations, a total

of three series, Chapter 15, 178, more than 24000 words, after the revision

of the regulations a total of 3 series, Chapter 11, 133, 17000 words, divided

into "general" and "special provisions" and "Supplementary Provisions"

Part 3. Among them, add, delete, modify the provisions of the proportion

of up to nearly 90%. 1, the general general is divided into five chapters.

The first chapter to the regulations of the guiding ideology, principles and

scope of application of the provisions, highlight the strengthening of the

party constitution consciousness, maintenance the authority of Party

Constitution, increase the party organizations and Party members must

abide by the party constitution, Yan Centralized centralized, would

examine at all levels of the amended provisions implementing and

maintaining Party discipline, and consciously accept the party discipline,

exemplary compliance with national laws and regulations. The second

chapter of discipline concept, disciplinary action types and effects of the

regulations, will be a serious warning from the original a year for a year

and a half; increase the Party Congress representative, by leaving the party

above (including leave probation) punishment, the party organization

should be terminated its representative qualification provisions. The third

chapter of the disciplinary rules of use prescribed in the discipline

rectifying process, non convergence, not close hand classified as severely

or heavier punishment. "Discipline straighten "At least eighteen years of

five years, these five years is to pay close attention to the provisions of the

central eight implementation and anti -" four winds ". The fourth chapter

on suspicion of illegal party disciplinary distinguish five different

conditions, with special provisions were made provisions, to achieve

effective convergence of Party and country 9 method. < rule > the

provisions of Article 27, Party organizations in the disciplinary review

found that party members have committed embezzlement, bribery,

dereliction of duty dereliction of duty and other criminal law act is

suspected of committing a crime shall give cancel party posts, probation or

expelled from the party. The second is < Regulations > Article 28 the

provisions of Party organizations in the disciplinary review But found that

party members are stipulated in the criminal law, although not involved in

a crime shall be investigated for Party discipline and responsibility should

be depending on the specific circumstances shall be given a warning until

expelled punishment. This situation and a difference is that the former

regulation behavior has been suspected of a crime, the feeling is quite strict,

and the latter for the behavior not involving crime, only the objective

performance of the provisions of the criminal code of behavior, but the plot

is a crime to slightly. < Regulations > the 29 provisions, Party

organizations in the discipline review found that party members and other

illegal behavior, affect the party's image, the damage to the party, the state

and the people's interests, we should depend on the situation Seriousness

given disciplinary action. The loss of Party members, seriously damaging

the party's image of behavior, should be given expelled from the party. At

this article is party member is in violation of the criminal law outside the

other illegal acts, such as violates the public security administration

punishment law, customs law, financial laws and regulations behavior. The

fourth is < cases > Article 32 stipulates, minor party members and the

circumstances of the crime, the people's Procuratorate shall make a

decision not to initiate a prosecution, or the people's court shall make a

conviction and exempted from criminal punishment shall be given within

the party is removed from his post, probation or expelled from the party.

Party members and crime, sheets were fined in accordance with For acts;

the principal Ordinance amended the provisions of the preceding

paragraph. This is the new content, in order to achieve Ji method effective

convergence. Five is < > the thirty third article 10 of the provisions, the

Party member due to an intentional crime is sentenced to criminal law

(including probation) sheets or additional deprivation of political rights;

due to negligence crime and was sentenced to three years or more

(excluding three years) a penalty, shall give expelled punishment. Due to

negligence crime is convicted and sentenced to three years (including three

years) in prison or be sentenced to public surveillance, detention, shall in

general be expelled from the party. For the individual may not be expelled

from the party, should control Approval. This is followed and retained the

original > < Regulations the provisions of punishment party authorization

rules and report to a level party organizations. For is "party members with

criminal acts, and by the criminal punishment, generally should be

expelled from the party". The fifth chapter of probationary Party member

of the discipline and discipline after missing members of the treatment and

punishment decisions, such as the implementation of the provisions, clear

the related party discipline and punishment decision made after, for duties,

wages and other relevant alteration formalities for the longest time. 2, sub

sub section will the original regulations of

10 categories of acts of violation of discipline integration revised into 6

categories, respectively, in violation of the punishments for acts of political

discipline "in violation of discipline behavior of punishment" in violation

of integrity of disciplinary action points "of violation punishments for acts

of mass discipline" "the violation of work discipline, punishment" in

violation of discipline of life behavior punishment "6 chapters. 3, annex"

Supplementary Provisions "clear authority making supplementary

provisions of, cases of interpretative organ, as well as regulations

implementation time and retroactivity etc.. 11 (3) learning understanding >

< regulations needs to grasp several key problems The first problem --

about the violation of political discipline behavior > < new ordinance

chapter 6 the political discipline column for the six disciplines, that is the

main opposition to Party leadership and the opposition of the basic theory,

basic line, basic program and basic experience, basic requirements of

misconduct made provisions of the disposition, especially the eighteen

since the CPC Central Committee put forward the Yan Mingzheng

treatment of discipline and political rules requirements and practical

achievements transformation for Discipline article, increase the false

debate central policies, cliques, against the organization review, make no

discipline of the principle of harmony terms. These are the party's eighteen

years in comprehensive strictly Process combined with the practice of rich

content. (1) false debate the central policies and undermine the Party of

centralized and unified the problem is made in accordance with the

provisions of the party constitution. Constitution in general programme

requirements adhere to democratic centralism is one of the requirements of

the construction of the party must adhere to the four cardinal. Application

of this principle is not only the party the basic organization principle and is

also the mass line in party life, it requires that we must fully develop

inner-party democracy, respect for the dominant position of Party members,

safeguarding the Party member democratic rights, give full play to the

enthusiasm and creativity of the party organizations at all levels and Party

members, at the same time, also must implement the right concentration,

ensure the party's mission < the chaos in unity and concerted action to

ensure that the party's decision to get quickly and effectively implementing.

The Party Central Committee formulated the major principles and policies,

through different channels and ways, fully listen to the party organizations

and Party members of the opinions and suggestions, but 12 is some people

face to face not to say back blather "" will not say, after the meeting said, ""

Taiwan does not say, and nonsense ", in fact, not only disrupt the people

thought, some causing serious consequences, the damage to the Party of

the centralized and unified, hinder the central policy implementation, but

also a serious violation of the democratic system of principles. There is no

doubt that shall, in accordance with the Regulations > 4 Specified in

Article 6 to give the appropriate punishment. For did not cause serious

consequences, to give criticism and education or the corresponding tissue

processing. (2) about the destruction of the party's unity < New

Regulations > the forty eighth to fifty second article, to damage Party's

unity unified and violation of political discipline, punishment situation

made explicit provisions. Article 52 of the new "in the party get round

group, gangs seek private gain, cliques, cultivate private forces or through

the exchange of interests, for their own to create momentum and other

activities to gain political capital, given a serious warning or withdraw

from their party posts disposition; if the circumstances are serious, to give

Leave a party to observation or expelled from the party. (3) on against the

organization review of the provisions of the constitution, party loyalty

honesty is party members must comply with the obligations. Members

must obey the organization decision, shall not violate the organization

decided encounters by asking questions to find organization, rely on the

organization, shall not deceive the organization, against the organization.

For example, after the investigation does not take the initiative to explain

the situation, but to engage in offensive and defensive alliance, hiding the

stolen money is against survey organization, is a violation of the behavior

of political discipline. Article 24 of the original > < Regulations, although

the provisions of the interference, hinder group review the behavior of the

fabric can be severely or 13 Aggravated punishment, but did not put this

kind of behavior alone as a discipline for qualitative amount of

discipline. > < new regulations increase the Article 57, "anti organization

review, one of the following acts, given a warning or serious warning; if

the circumstances are relatively serious, giving removed from or placed on

probation within the party post; if the circumstances are serious, give

expelled from the party: (a) on supply or forged, destroyed, transfer,

conceal evidence; (II) to prevent others expose, providing evidence

Material; (III) harboring co personnel; (4) to the organization to

provide false information, to hide the fact; (5) the him against the acts of

the organization review. "< rule > add this clause to the Constitution

requires more specific, the previous no punishment in accordance with the

definite list and put forward clear punishment in accordance with. (4)

about organizing or participating in superstitious activities as <

Regulations > about engage in activities of feudal superstition obstruction

of social management order" violations of Article 164 the provisions, but

according to the original < rule > only in disrupting production, work,

social life order The case to be disciplinary treatment, in other words, alone

make the feudal superstition, organize or participate in the activities of

feudal superstition of, does not constitute a violation. Which is not

consistent with the requirements of our party's political party. > < new

regulations in this change is, superstitious activities on the political

discipline, increase the Article 58, is the organization of Party members, in

superstitious activities included in violation of the negative list of political

discipline deserves punishment, which and Party members should adhere

to the correct political principle, political standpoint and viewpoint is

consistent. 14 the second question about organization and discipline

violation behavior of democratic centralism is our The party's fundamental

organizational system. < New Regulations > Chapter 7 "in violation of the

behavior of organizational discipline punishment" mainly for violation of

democratic centralism, contrary to the "four obey the discipline behavior

for source classification rules. Increased not in accordance with the

relevant provisions or requirements to the organization for instructions to

report on major issues; do not report truthfully report about personal

matters; falsify personal archives; hide before joining the party serious

mistakes; leading cadres in violation of the relevant provisions of the

organization, will participate in the spontaneous formation of the old

Xiang, Alumni Association, comrades in arms; to obtain illegal country

residence abroad or foreign nationality, illegal for private frontier

Documents such as discipline terms. (1) on the report truthfully report

personal matters in 2010 the Central Committee of the Communist Party of

China office, office of the State Council introduced < provisions on issues

related to the leading cadres to report personal >, is clear about the request,

deputy division level and above leading cadres should truthfully report

changes in my marriage and spouse, children, moved to the country

(territory), practitioners, income, real estate, investment and other matters,

for failing to report, do not report, concealed and unreported, according to

the seriousness of the case, giving criticism and education, and to make a

correction within a time limit, shall be ordered to make a check, the

commandment Jiemian conversation, informed criticism or jobs, free Post

processing, constitute violations, in accordance with the relevant

provisions shall be given a disciplinary sanction. But since the original <

Regulations > and there is no corresponding specific terms, the violation of

the regulations, do not report, as a false report about personal matters, there

is no corresponding disciplinary action terms, in practice it is difficult to

operate. In this regard, in order to solve is not reported, as a false report

about personal matters 15 asked censure, the new < Regulations > add the

Article 67 of violation of personal matters related to reporting

requirements, report truthfully report the clear punishment basis, making

this kind of violation behavior is no longer free drilling for Exhibition on

matters of personal checks to verify and supervision of cadres, discipline

review provides a powerful discipline guarantee. (2) about the illegal

organization, to fellow, alumni, friends of the war will < regulations

stipulated in Article 68 of >, leading cadres of the party in violation of

relevant provisions of the organization, will participate in the spontaneous

formation of fellow, Alumni Association, comrade in arms to give the

punishment according to the seriousness of the case. Here special needs

note is three points: this provision for only the leading cadres ", reflecting

the high requirements of leading cadres; second violation in 2002, the

Central Commission for Discipline Inspection, the central Organization

Department and the The relevant provisions of the General Political

Department jointly issued the < off in leading cadres not to participate in

the initiative to set up "the villagers would be" alumni "" comrades in arms

organization notice >. That is to say, to the spontaneous formation of fellow,

Alumni Association, comrades in arms will constitute the premise of

discipline is a violation of the provisions of this. The notification specified,

leading cadres are not allowed to participate in the spontaneous

incorporation of fellow, alumni, between comrades association would like

the organization and shall not bear the sorority

Human and the organizer shall not hold the corresponding position in

the sorority; shall not borrow machine woven "network" and engage in kiss

sparsely, round and round the gangs, but not "align" "Jieyi Gold Orchid"

behavior. The third is to emphasize here that shall be organized to

participate in the initiative to set up the villager, Alumni Association,

comrades in arms. The so-called 16 spontaneous was established mainly

means without registration. Therefore, Party members include leading

cadres in the normal range of fellow, alumni, comrades in the party is not a

violation of the rules of Party discipline. The three problem about integrity

violations discipline Lian Jie discipline has been eighteen years clean

government and anti The focus of the work of corruption. This Ordinance

to amend, honesty and discipline this biggest adjustment, the new content,

most of which prescribed by the original < criterion of a clean and honest

administration > 8 ban and 52 are not allowed into the basic this part. (1)

the central eight provisions of the spirit and requirements into < New > in

the regulations of the party's eighteen years, central resolutely implement

the provisions of the eight and pay close attention to the node and intensive

briefing, on public funds, private bus, public funds tourism, gifts of public

funds, the big parade and lavish weddings and festive, illegal payment

allowances and subsidies, illegal construction of buildings such as the

original masses reflects the relatively strong, "four winds" problem of the

Resolute rectification. But original < Regulations > to eat and drink, super

standard reception and no clear and specific expression, new < rule > will

implement eight Central provisions of the spirit of the problem increased to

"clean cheap self-discipline" chapter, clear to exceed the standard, beyond

the scope of the reception or borrow machine eating and drinking etc. some

in violation of the provisions of the spirit of the eight central relevant

persons responsible for punishment, once the violation will be according to

the < rule > severely punished, binding, enhanced significantly. One is to

add Article 87, about to obtain illegal, hold, and the actual use of the sports

card, golf ball cards and other consumer card. Illegal access to private

clubs made the punishment provisions. The second is increase the Article

97, has made provisions of the disposition of illegal self pay or 17

spamming allowances, subsidies and bonuses. The third is added to the

Article 99, on violation of super standard, beyond the scope of the

reception or borrow machine eat and drink to make the provisions of

punishment. The fourth is to increase the Article 101, on the management

of conference activities in violation of the provisions made sanctions

regulations. The fifth is the increased Article 102, for violation of office

space management provisions made the punishment provisions. Six is to

split the original < rule > Article 78, formed article 98, Article 100 of

public Models of tourism, violate the provisions on the administration of

the use of discipline of the bus through the list of made a more detailed

provisions, apply more operational. Seven is increased the article 96, in

violation of the relevant provisions of the, to participate in public funds to

pay for dinner, high consumption of entertainment, fitness activities and

public funds to buy gift, send gifts to make the provisions of the disposition.

On the violation of the central provisions of the spirit of the eight, in

addition to > < new regulations into "violation of honesty and

self-discipline" misconduct outside, is different with the original <

Regulations >, revised < rule > clearly defined not only to disposition of

the directly responsible persons, but also dispose of collar Guide

responsibilities. (2) increased trading rights, use of authority or position

influence as relatives and close to profit violation of the terms of the < New

Regulations > absorption < clean politics several guidelines > the relevant

provisions spirit, increase the "negative list, including trading rights, the

functions and powers or duties of influence as relatives and staff around

profit. Increase Article 81" mutual use of office or authority ring for each

other and their spouses, children and their spouses and other relatives,

around 18 personnel and other specific relationship between the people to

seek benefits engage in trading rights, given a warning or serious warning

Sanctions; if the circumstances are relatively serious, giving removed from

or placed on probation within the party post; if the circumstances are

serious, shall be expelled from the party. Increase Article 82 "connivance,

acquiescence to the spouse, children and spouse etc. relatives and staff

around the effect of Party members and cadres personal authority or

position for personal gain, if the circumstances are relatively minor, given

a warning or a serious warning; if the circumstances are relatively serious,

giving removed from or placed on probation within the party post; if the

circumstances are serious, the given

Expelled from the party. Party members and cadres of the spouses,

children and their spouses does the actual work and get salary or although

the actual work but to receive significantly beyond the same rank salary

standard, Party members and cadres informed fails to correct, in

accordance with the provisions of the preceding paragraph. "(3) about the

gifts, gifts misconduct from handling practices in recent years, engaged in

official cadres received gifts, gifts problems more prominent. This has

seriously affected the image of Party members and cadres, damaged the

relations between the party and the masses, and is a hotbed of corruption, is

really necessary for this kind of behavior to be disciplined. < rule > no on

accepting gifts, gifts, Card consumption behavior to engage in simple "one

size fits all", but the difference between the different separately. One is in

accordance with the provisions of Article 83, accepting may affect the

impartial enforcement of the official gifts, gifts, consumer cards to

depending on the seriousness of the case shall be given disciplinary

sanctions. That is to say, for may affect the fair execution of business gifts,

gifts, consumer cards are not allowed to accept. 19 is in accordance with

the provisions of Article 83, accepting was significantly higher than

normal ceremony is still exchanges of gifts, gifts, consumer card to

disciplinary action. This is new regulations that daily life is purely

reciprocity, accepting the same thing, boys , fellow friends gifts, gifts,

shopping cards, although and fair execution of business has nothing to do,

also want to as the case shall be dealt with, the situation is obviously

beyond normal reciprocity ". The so-called" reciprocity ", one is

emphasizes the reciprocal in protocol. In other words is you to me how, I to

you how, not only does not go. The second is to significantly exceeded the

normal local economy level, customs and habits, economic capacity of

individual gifts, gift value. Specific sanctions to according to the

processing of a variety of factors to consider, as appropriate. The third is

the root according to the provisions of Article 84," to Engaged in public

service personnel and their spouses and children, children's spouses and

other relatives and other specific relationship presented Ming Xianchao

normal reciprocity of gifts, gifts, consumer card, if the circumstances are

relatively serious, given a warning until probation. "In accordance with the

above provisions, gift giving significantly beyond the normal reciprocity,

giver constitute the discipline. (4) on illegal trading of stocks or of other

regulations of securities investment < > Article 88 is engaged in

punishment regulation of camp and activity in violation of the relevant

provisions on. Among them, 3 will" buying and selling stocks or in other

securities investment "column as one of disciplinary cases Out. First need

to be clear, > < regulations did not change the provisions of the Ordinance.

The ordinance of the provisions of the second paragraph of Article 77

provisions "who, in violation of the provisions of the sale of stocks" is one

of the violation, and at the beginning of the first paragraph of this article

"violation of 20 against the relevant provisions of the" textual

representation of the repeat revision. In, just from the legislative technique

removed the "personal" in violation of the provisions, content and not to

change the original provisions. Need to clear is, "buy or sell a stock or of

other securities investment" refers to violation of the relevant provisions

refers to in April 2001, the Party Central Committee, the State Council

promulgated the On the work of the party and government organs staff's

personal investment in securities if dry provisions >. According to the

provisions of Article 3, use of work time, office facilities, the sale of stocks

and securities investment fund belongs to illegal behavior. The fourth

question, about the violation of the masses of the disciplinary actions <

new regulations > would violate public discipline behavior of a single set

of a class of restored "three rules of discipline and eight note" in the

discipline of the masses of excellent traditional. < New Regulations >

Chapter 9 "to violate the masses of disciplinary action", mainly the

destruction of the party's close ties with the masses of misconduct made

provisions on disciplinary; enrich and perfect the super standard, beyond

the scope of Xiang Qun < All to raise fund and labor, in for involving the

public affairs deliberately, chinakayao, in social security, policy support,

disaster relief funds and materials and other matters assigned any kind and

affectionate friends, obviously unfair acts against the interests of the

masses of the disciplinary terms; increase the terms not in accordance with

the provisions of the public party provided, government, factory and

village (neighborhood) provided etc. violation of the people's right to know

the behavior of the discipline. The fifth issue, on the violation of work

discipline violation of work discipline added "negative list, including Party

organizations carry out strictly

Main responsibility for poor discipline terms. (1) the new party

organization comprehensive strictly the main responsibility of the party

does not fulfill the 21 or perform poor disciplinary terms < New

Regulations > has a lead people to pay attention to the new terms, that is, in

chapter ten "on the violation of work discipline behavior punishment"

increase in the one hundred and fourteenth "party fail to perform

comprehensive strictly the main responsibility of the party or to perform

comprehensive strictly the main responsibility for administering the

ineffective, resulting in serious damage or serious adverse effects, to the

person directly responsible and the responsibility of leadership and give a

warning or serious warning. The situation is serious, giving removed from

their party posts or on probation Punishment. "Here the changes. For the

first time, the main responsibility write < rule >. (2) new shall report does

not report or false reporting discipline shall increase the 117 bar" in the

higher level units to check to inspect the work or report to the parent unit,

work report of shall report the matters do not report or do not report, cause

serious damage or serious adverse effects of, to the person directly

responsible and the responsibility of leadership, to give warning or a

serious warning; if the circumstances are serious, giving removed from

their party posts or placed on probation. "For example, during the tour

visits to the region, the unit Members the obligation to the inspection teams

to reflect the true situation, to conceal not reported or intentionally to the

inspection teams to provide false information, causing serious damage or

serious adverse effects of, the person directly responsible and the

responsibility of leadership should be in accordance with the provisions of

< rule > Article 117 to give the appropriate punishment. (3) the new not

granted in accordance with the provisions of punishment, not according to

the provisions of the implementation of disciplinary measures 22 violation

of the provisions of Article 115 "Party organizations have one of the

following circumstances, the direct leadership responsibility. Probation:

members were sentenced punished, in accordance with the provisions give

disciplinary action or in violation of state law Rules of behavior should be

given disciplinary punishment and dispose of; disciplinary punishment by

decision or complaint review the decision made, not in accordance with the

provisions of the implementation decisions on punishment of the party,

position, rank, and the treatment of the matters; Party members subject to

disciplinary action, not in accordance with the cadre management authority

and organizational relationships of by dispose of Party members to carry

out education and supervision of daily management. "What needs to be

pointed out is," cliff "demoted with cars, housing, secretary problem,

implementation is not a discipline and party posts and ranks treatment by

the organization department is responsible for the implementation, with

cars, housing by the logistics department is responsible for the

implementation of, Ji Commission responsible oversight responsibilities.

The six questions, about the acts violating the discipline of life "in

violation of discipline of life behavior punishment", mainly to "four

winds" problems and a serious violation of social morality, family virtue

acts of misconduct made provisions on disciplinary, an increase of

extravagant life, contrary to the social public order and good customs

disciplinary terms. Worth mentioning is, > < Regulations in Article 150

about "adultery" "mistress (Cardiff) formulation in the new < rule > is

removed, to expand the scope of Article 127 provisions" and others hair

improper sexual relations, let face disciplinary action Wider more strict.

Four, and earnestly do a good job in the < code > and < rule > implement

system of life lies in execution. < code > and < Regulations > is 23 Party

organizations at all levels of a strong constraint and all Party members

follow. Learning and implementing the < code > and < rule > is party

committees (party), commission for discipline, discipline inspection

group), the majority of Party members and cadres of the common

responsibility, must party caught together, the party one execution. () Party

committees (party) and play and implement comprehensive strictly the

main responsibility, pays special attention to the two party regulations

learning cross penetration. One is to Adhere to the party constitution is

fundamental to follow, and resolutely safeguard the authority of the Party

Chapter. The second is to adhere to the problem oriented, to strictly

political discipline and political rule moments in the first place. The third is

to adhere to the discipline and rules quite in front must not allow the

bottom line to break the discipline. The fourth is to seriously organize the

study of propaganda and education, in the city party members to create a

disciplined, about the rules of the strong atmosphere. (II) Commission for

Discipline Inspection at all levels (Discipline Inspection Group) to an

important basis for the revised two party regulations as, adhere to easily

blame, strengthen supervision and enforcement

And early method in combining Ji, increase accountability efforts. One

is to two regulations within the party important basis, adhere to the party

constitution duties, with strict discipline to maintain the constitution

authority. The second is to adhere to high standards and keep the bottom

line, adhere to Ji Yan in law and discipline, the discipline and rules quite in

front, grasping grasping small, easily blame, comprehensive use of

supervision and discipline of "four kinds of form" in the discipline

embodies the strict requirements and care for the discipline, tighten up,

Yan. According to discipline in accordance with regulations to carry out

disciplinary review. Increase the violations punishment, clues can initiate

an investigation on the trial of cases According to the discipline on the

provisions of the proportion of processing and control manager maintains

discipline. To focus on investigating non convergence, don't accept hand

serious disciplinary violations at the same time, pay more attention to the

general review of discipline 24 behavior, and gradually increase the lighter

punishment. Four is to illuminate two party regulations, combined with the

local district of the Department of party conduct Lianzheng to relevant

laws and regulations system clean, timely research proposes to establish,

change, waste release opinion, avoid conflict, and the fasten system of

cage, and gradually formed not rot, not rot, not want to rot system and

working mechanism. (3) the leadership of the party members and cadres

should play an exemplary role. The rate of higher consciousness of the

front of the Ordinance to lead practice self-discipline norms, leading to

maintain discipline of seriousness and authority. One is the above rate,

demonstration and guidance, take the lead in learning and mastering the <

code > and < > the requirements and regulations, do the deep

understanding, learning to use. The second is to play an exemplary role in

abiding by discipline rate, take the lead in practicing self-discipline norms,

firmly establish before the discipline are equal, the system has no privilege,

discipline is no exception, and consciously do standards, require more

strict measures more practical. Third is to consciously accept supervision,

conscientiously participate in the democratic life and debriefing honesty

responsibility, such as Real to the party organization to report personal

matters, and to accept the supervision of the work and life of the normal,

habits under the supervision of the exercise of power, to carry out the work.

The fourth is to set an example for the strict enforcement of discipline.

Leading cadres should take the lead in the maintenance of discipline of

seriousness and authority, to dare to seriously, dare to struggle, dare to

offend people, for misconduct not laissez faire, but do not indulge, not

tolerate to ensure the party constitution of party compasses party put in

place. (4) the majority of Party members and cadres to set high standards

and hold the bottom line, consciously abide by the < code > and < rule >.

One is to control the < standard > and < 25 cases >, tight Close connection

with their own thoughts, practical work and life, efforts to solve the

problems, to enhance the study and implement of the effectiveness and

pertinence. The second is to establish a high standard and hold the bottom

line, consciously in the self-discipline pursuit of high standards, strictly in

the party away from the red line discipline, discipline, about the rules and

know fear, distrust, the formation of the honor system, comply with the

system, safeguard system of good habits.

Regulations and discipline regulations of < < New Revision of the

Communist Party of China clean fingered self-discipline criterion > and <

Chinese Communist Party Disciplinary Regulations > is the Party Central

Committee in the new situation to promote the comprehensive strictly root

of the lift, the regulations of the party construction of keeping pace with the

times. We should study and implement the Standards > and < > as the

primary political task, adhere to the party constitution duties, adhere to the

discipline of, Ji Yan in law, the full implementation of supervision and

discipline accountability responsibilities for coordination and promotion

"four overall" strategic layout in XX District vivid practice to provide a

strong guarantee. - Si Jian Wu, and effectively enhance the implementation

of the implementation of the < code > < > The consciousness of General

Secretary Xi pointed out that the party is in charge of the party, to manage

the party; strictly, it can cure good party. Criterion > and < rule > keep pace

with the times is our party to form a new potential strictly rules, to deepen

understanding of the ruling law, is a comprehensive strictly, and strengthen

the supervision within the party important grasper. Criterion > closely

linked to the theme of self-discipline, self-discipline intensity-modulated,

focusing on morality, for the majority of Party members and cadres set to

see, feel the high standard, show the Communists noble moral sentiment;

District Ordinance < < rule > the constitution of discipline integration into

a political discipline, organization and discipline, honesty and discipline,

discipline of the masses, work discipline, discipline, emphasize discipline,

focusing on established rules, to draw the party organizations and Party

members do not touch the bottom line. Party committees (party) to

effectively strengthen the study and publicize the implementation of the <

code > and < rule > the organization and leadership of criterion > and < > a

full range, multi angle, deep publicity, the formation of study and publicize

and implement the boom, in order to consolidate the development of good

political environment to create a positive environment and atmosphere.

The majority of Party members and cadres to strict requirements, the <

rule > and < Ordinance cases > as a guide to action and behavior criterion,

adhere to the moral standards and discipline of the bottom line, to maintain

the discipline of worship and awe, learning, compliance, and maintain

party discipline and rules of the model. The discipline inspection and

supervision organs and cadres to the < code > and < > as the deepening of

the "three", and strengthen supervision and discipline of accountability is

important to follow correctly grasp the use of supervision and discipline of

"four types", promote the comprehensive strictly in new roots. Strict

discipline, adhere to the discipline and rules quite in front of the enterprise

in the implementation of expensive to implement to execute. The

discipline inspection and supervision organs to implement the < code > and

< Efforts to investigate cases > as an opportunity, adhere to the party

should manage the party strictly, serious performance of their duties to

promote two regulations implementation. Change discipline concept.

From the simple "investigation of illegal" to a comprehensive "stare at

violate discipline"; from the business case to prosecute the big cases and

timely solve the signs of tilt to. From the orientation to the normal

supervision; from the tube "minority" to resist the "most". Guide Party

members and cadres to seriously implement the < code > and < rule >,

consciously abide by the political, organizational, honest people, work, life

six discipline. Urge the leadership cadres sent to play an exemplary role,

take the lead in strictly enforced. Relaxation and rest Strong wind is Su Ji,

closely linked to the "four winds" prone to multiple, the masses reflect the

strong important nodes and, glued to the four winds "new form, new trends,

seriously investigate and deal with violations of the central eight

provisions of the spirit, to increase the bulletin exposure intensity, the

formation of Chajiu" four winds "loudly, continue to release and discipline

must be strict signal. At the same time, extended supervision tentacles,

through the development of the rural and fishery party conduct Lianzheng

construction inspection, issued in a timely manner, Chajiu occurred in

grassroots side of corruption and unhealthy, and earnestly safeguard the

interests of the masses and social stability. The creativity and discipline.

Grasp and make good use of the supervision and discipline of" four types ",

to ensure the Promoting clues to lots of discipline and the law of the

vacuum tube, strict together. Not only to the "less" and "very few"

thorough investigation severely punished, but also the "most" to maintain

zero tolerance trend through layers of conductive pressure, let the

discipline about the rules for each party members and cadres consciously

follow. At present, it is necessary to implement the "list" management,

strictly follow the clues to the disposal of five standards, make the

classification of disposal, dynamic cleanup. Zadok Party committees at all

levels to implement the main responsibility, comprehensive use of

disciplinary action and tissue processing and other means to effectively

curb the commonplace, used to see do not blame the "small problem", not

because of "practice" and "exception". Prominent Discipline

characteristics, the problems of violation of discipline and rules into the

focus of supervision and discipline and disciplinary review. At the same

time, increase case double check the intensity, the serious problems of

discipline violations or "four winds" ban but not absolutely, not only to be

held directly responsible, but also held leadership responsibility; not only

to pursue studies the main responsibility of the Party committee, and to

pursue Commission for Discipline Inspection and supervision

responsibilities and promote accountability to become the new norm. The

implementation of supervisory responsibility. Maintain < code > and <

rule > the seriousness and authority of the discipline and rules and truly

become the party's ruler. Discipline as supervision within the party the

specialized agency, we must strengthen the responsibility to act, adhere to

the Impartial discipline accountability, earnestly will be strict discipline,

discipline must be punished, and severely punish the acts in violation of

rules and regulations.

机械图纸中常见的符号及意义(中英文)

本文发布于:2024-02-05 07:32:52,感谢您对本站的认可!

本文链接:https://www.4u4v.net/it/170708957256238.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:公差   特征   尺寸   用来   符号   表面
留言与评论(共有 0 条评论)
   
验证码:
排行榜

Copyright ©2019-2022 Comsenz Inc.Powered by ©

网站地图1 网站地图2 网站地图3 网站地图4 网站地图5 网站地图6 网站地图7 网站地图8 网站地图9 网站地图10 网站地图11 网站地图12 网站地图13 网站地图14 网站地图15 网站地图16 网站地图17 网站地图18 网站地图19 网站地图20 网站地图21 网站地图22/a> 网站地图23