【信息技术】【2018】【含部分源码】基于图像处理的车速测量

阅读: 评论:0

【信息技术】【2018】【含部分源码】基于图像处理的车速测量

【信息技术】【2018】【含部分源码】基于图像处理的车速测量


本文为塞浦路斯近东大学(作者:ABDULGADER RAMADAN GADAH)的硕士论文,共85页。

在本论文中,提出利用影像处理来实时侦测车速,它的目标是在视频中分割车辆并实时检测其速度。这项工作包括许多阶段,包括汽车的检测与速度分析。首先,捕获视频,并将第一帧视为参考图像,以便稍后将其用于距离测量。其次,对视频或帧进行分割(二值化),并对车辆进行检测。然后,连续地使用保存的参考图像,测量每个新帧之间的距离,并基于该距离值计算速度。速度是根据车辆在特定帧中的距离和时间计算的。最后,速度根据其值的大小设置为3个不同的等级:慢速、中等和快速。系统显示车辆移动时的速度值,并拍摄超过预设速度限制的车辆,存储在文件夹中。

In this thesis, I propose the use of videoimage processing for video processing real time detection of vehicles speed. Itaims to segment vehicles in a video and detect its speed in real timemovements. The work consists of many stages until the calculation of vehiclesspeeds where it detects the speed of cars while they are moving. At first, thevideo is captured and the first frame is considered as a reference image sothat it will be later used for distance measurement. Secondly, the videos orthe frames are segmented (binarized) and the vehicles are detected. Then,continuously, and using the saved reference image, the distance of each newframe is measured and based on the value of it the speed is calculated. Thespeed is calculated based on the distance and time of the vehicle in a specificframe. Finally, the speed is set to 3 bands based on their value: slow, medium,and fast. The system shows the value of the speed of the vehicle as it moves,as well as take a picture of the vehicle that exceeds the preset speed limitand stored in folder can be referred to.

  1. 引言
  2. 图像处理
  3. 理论框架
  4. 系统设计
  5. 结果分析
  6. 结论
    附录:MATLAB代码

更多精彩文章请关注公众号:

本文发布于:2024-02-01 06:24:57,感谢您对本站的认可!

本文链接:https://www.4u4v.net/it/170673989934534.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

留言与评论(共有 0 条评论)
   
验证码:

Copyright ©2019-2022 Comsenz Inc.Powered by ©

网站地图1 网站地图2 网站地图3 网站地图4 网站地图5 网站地图6 网站地图7 网站地图8 网站地图9 网站地图10 网站地图11 网站地图12 网站地图13 网站地图14 网站地图15 网站地图16 网站地图17 网站地图18 网站地图19 网站地图20 网站地图21 网站地图22/a> 网站地图23